nitrotuta.blogg.se

01j multitronic repair manual
01j multitronic repair manual






01j multitronic repair manual

  • Run and save a complete Auto-Scan and save it prior to module removal.
  • The procedure needs to be repeated at least 5 times and can be repeated up to 10 times until the measuring values show ADP OK.
  • Move the selector lever in position R and drive with partial load 20 m / 70 ft reverse, then brake to standstill.
  • Move the selector lever in position D and drive with partial load 20 m / 70 ft forward, then brake to standstill.
  • Transmission has been replaced Channel 00 Block 010 (in 1st Row) Block 011 (in 2nd Row) Check fields 2, specification is ADP OK.
  • Transmission Control Module has been replaced.
  • Transmission Control Module has been recoded.
  • Normally the adaptation needs to be carried out when:.
  • All driving and braking has to be done in partial load, avoid full throttle/braking!.
  • If the procedure does not succeed in the first try, make sure the temperature is above 80 ☌.
  • Transmission Oil Temperature must be between 60 ☌ and 90 ☌.
  • Manual Transmission multitronic® CVTStepped Mode O1V / O1N P R N D P R N 4 3 2 D 5 24 SSP 228/002. The Self-Study Program is not a Repair Manual! When carrying out maintenance and repair work, it is. Multitronic ® 01J Self-Study Program Course Number 951103 Audi of America, Inc. There is quite a bit of difference between the various transmissions on these cars make sure you know what you are getting before you buy. Audi A4 B8: Manual, Tiptronic, Multitronic CVT, S-Tronic DSG Transmission Comparison.
  • The illustration on the reservoir for ATF filler system f.
  • Only ATF for CVT transmission which can be obtained as replacement part must be used in the planetary gear. CAUTION: The Continuously Variable Automatic Transmission Multitronic 01J requires a different ATF than shift automatics. Designation: multitronic® 01J Factory Designation: VL 30.

    01j multitronic repair manual

    Adaptation Special Procedures Defined Test Drive Prerequisites: When replacing this module use the coding from the original unit or the repair manual coding charts.

  • Coding To Code this transmission, make sure Ignition is ON, but Engine is NOT running.







  • 01j multitronic repair manual